Table of contents

  1. Table of contents
  2. Installing the splinky shield
  3. Installing the plates
    1. Screws
    2. Anti-slip pads
  4. Installing the tents
    1. Screws
    2. Anti-slip pads

Installing the splinky shield

We will detail only one side, as the other side is the same, but symmetric.

For the following step, please prepare:

  • keyboard assembly (x2)
  • M4 screw (x2)

On the pictures, we use a Splinktegrated - those come with premium kits. The Splinky + Shield works exactly the same, so inspect the pictures carefully.

Screw in the splinky shield assembly:

Solder the audio jack:

Do this for both sides.

Installing the plates

If you have tents, skip to the next section “Installing the tents”.

Screws

For the following step, please prepare:

  • keyboard assembly (x2)
  • M4 screw (x8)
  • plates (x2)

Secure the plates on the keyboard using the screws:

Anti-slip pads

For the following step, please prepare:

  • anti-slip pads (x10)

Install the anti-slip pads:

Installing the tents

This step is optional, if you have tents.

Screws

For the following step, please prepare:

  • keyboard assembly (x2)
  • M4 screw (x8)
  • plates (x2)
  • tents (x2)

Secure the plates on the keyboard using one screw at the bottom:

Install the tents with the rest of the screws:

Anti-slip pads

For the following step, please prepare:

  • anti-slip pads (x10)

Install the anti-slip pads: